Sand & refinish
Hardwood Floor
Refinishing.
Worn, scratched or dull hardwood can often be sanded and refinished instead of replaced. We come out, look at your floors and tell you honestly whether refinishing will work. Our own crews do the sanding and finishing.
Free in-home estimates across the St. Louis area. We come to you, measure and bring samples. Call Mike or book a time online.

The short answer
Hardwood refinishing
in St. Louis.
MC Flooring & Tile sands and refinishes solid hardwood floors across St. Louis County, St. Louis City and St. Charles County, with our own crews. Mike comes to your home for a free estimate, checks how much wood is left, and tells you honestly whether refinishing will work or whether replacing makes more sense.
What we do
Refinish first.
Replace only if needed.
One of hardwood's biggest advantages is that it can be sanded and refinished more than once. Sanding takes off the old finish along with surface scratches, gray traffic paths and wear, and a fresh finish goes on. In many older homes, the wood under years of wear or old carpet is still good.
Not every floor is a candidate. Boards that are too thin, badly water-damaged or loose may need repair or replacement first. We'll tell you straight at the free estimate, and if replacement makes more sense, we install hardwood floor installation, LVP flooring installation and laminate flooring installation too.
Good candidates
- Solid hardwood with surface scratches and wear
- Floors where the finish has worn through in traffic paths
- Hardwood uncovered under old carpet
- Floors you want in a new stain color
- Patched or added boards that need to blend in
The steps
What refinishing
involves.
Every floor is different, but most refinishing jobs follow the same order.
Repairs first
Loose or damaged boards are fixed or replaced, and nails that sit high are set, so the sander has a sound floor to work on.
Sanding
The floor is sanded in passes, coarse to fine, down to fresh wood, with the edges and corners done separately so the whole room matches.
Stain, if you want it
Natural or a new color. Stain looks different on every floor, so it pays to see it on your own wood before the whole room is done.
Finish coats
Protective finish goes on in coats, with drying time in between. The room stays empty until the finish has cured enough for furniture.
Stain matching
Matching the color
you already have.
When new or repaired boards have to blend into an existing floor, or you want a new color, this is how we approach it.
Test on your own wood
Stain reads differently on every species and even every board, so we try it on your floor before a whole room is done.
Blending repairs
Replaced boards are matched for species and width as closely as possible, then sanded and finished with the rest so the floor reads as one.
Natural or a new color
Sanding goes back to bare wood, so you can keep a natural look or change color on most floors.
Your light, not ours
You approve the color in your own rooms, next to your trim and cabinets.
Wood floors
Hardwood
we've worked on.
Afterward
Keeping a refinished
floor looking new.
Give it time
We'll tell you when you can walk on it, when furniture can go back, and when rugs can go down.
Felt pads
Put felt pads under chair and table legs before the furniture goes back.
Clean it dry
Sweep or vacuum grit often and use a barely damp mop. Skip steam mops and soaking the floor.
Mats at the doors
Most wear comes from grit tracked in. A mat at each entry does a lot.
Free in-home estimate
What the free
estimate covers.
The estimate is free and happens at your home, not in a store. Mike comes out himself, so the person who looks at your floor is the person who answers for the job.
Samples at your house
Mike brings samples with him, so you see colors and finishes in your own light, next to your own cabinets, walls and trim.
How much wood is left
We look at the boards, check for movement and damage, and check whether there's enough wood left to sand.
Repairs and color
We note any boards that need repair or replacement and talk through natural or stained finishes.
A written quote
You get the price in writing, with what is included. We don't publish prices because every room is different. Call and ask, and we'll give you a straight answer.
How it works
How refinishing
works with us.
Call or book online
Call or book online. Tell us which rooms and what the floors look like now.
We come to you
Mike comes out, looks at the wood and tells you honestly if refinishing will work.
Written quote
You get a written quote, including any repairs.
Our crew installs
Our own crew repairs, sands down to fresh wood and applies the new finish.

Who you work with
Owner-led.
Honest about options.
MC Flooring & Tile is owner-led by Michael "Mike" Marcus. If refinishing will do the job, we'll say so, even if a new floor would be a bigger sale.
MC Flooring & Tile carries forward the legacy of The Ceramic Tile Library, known earlier as Northwest Tile, a Webster Groves tile business that has served St. Louis homeowners, designers and contractors for more than 75 years. We're insured. We stand behind every install with a warranty on our work and on the product, plus a satisfaction guarantee. Senior and military discounts are available. Ask when you call.
Service area
Refinishing across
the St. Louis area.
Based in Maryland Heights, we sand and refinish hardwood across St. Louis County, St. Louis City and St. Charles County, including Chesterfield, Ballwin and Kirkwood.
Areas we serve
- Maryland Heights
- Chesterfield
- Ladue & Creve Coeur
- St. Charles & St. Peters
- Kirkwood & Webster Groves
- Ballwin & Wildwood
- Town and Country
- Clayton
- Des Peres
- O'Fallon
- Sunset Hills & Crestwood
- Lake St. Louis
- St. Louis City
- University City
- Wentzville
- Ellisville & Clarkson Valley
- Eureka
- Florissant
FAQ
Refinishing
questions.
How long does hardwood refinishing take?
It depends on the floor: how many rooms, how much repair, whether you stain, and the drying time between finish coats. Mike gives you a plan for your house with the written quote.
Can you match my existing stain?
Often, yes, for example when repaired or added boards have to blend in. Stain looks different on every floor, so we test it on your own wood and you approve the color before the room is done.
Do you refinish hardwood in Chesterfield, Ballwin and Kirkwood?
Yes. Chesterfield, Ballwin and Kirkwood are all in our regular service area, and the in-home estimate is free.
How many times can hardwood be refinished?
Solid hardwood can usually be sanded and refinished several times over its life. How many depends on how much wood is left above the tongue, which we check at the estimate.
Can engineered hardwood be refinished?
Sometimes. It depends on how thick the top layer of real wood is. Some engineered floors can be sanded; others are too thin. We'll look at yours and tell you.
Should I refinish or replace my floors?
If the boards are solid and there's enough wood left, refinishing is usually the better value. Water damage, loose boards or worn-through wood can make replacement the better call. We'll tell you which.
Can I change the color of my floors?
Usually, yes. Sanding takes the floor back to bare wood, so a new stain color is possible on most species. We'll talk through options for your wood at the estimate.
Can you refinish hardwood we found under old carpet?
Often. Hardwood under carpet is frequently in good shape. Staple holes, pad stains and old repairs need a look first, which we do at the free estimate.
Will we have to move out?
Not usually, but the rooms being refinished are off limits while the floor is sanded and the finish cures. We'll tell you how to plan around it for your house.
How much does refinishing cost?
It depends on the material, the size of the space and what is underneath, so we don't publish prices. Call Mike or book a free in-home estimate and you'll get a written quote for your home.
Do you also install new floors?
Yes. Hardwood, LVP, laminate and tile, all installed by our own crews.
Reviews
Straight from
Google.
Dale Klaus
Google review
…What had been a disaster caused by another company, he came in and not only corrected the issues but made the area better than before. We would definitely call him again.
Christopher Williams
Google review
Excellent work and very dependable. Definitely a keeper.
Free estimate
Tired floors?
Get an honest answer.
Mike comes out, looks at your hardwood and tells you whether refinishing will work, with a written quote.
Free in-home estimates · Senior & military discounts
Prefer a callback?
Request your free in-home estimate
Calling is fastest: (314) 745-5930. Or send your details below and we will call you back.
